The support forum is temporarily read-only. For urgent requests, please email contact[at]psyberia.net

[closed] Naming recorded track

Something wrong? Report it here
Post Reply
ydespond
Posts: 14
Joined: Mon Mar 23, 2015 1:06 pm

[closed] Naming recorded track

Post by ydespond »

With the last version, it becomes difficult to name a recorded track.

The track must be named before it is stopped for having the track name and the file name to be the same.

It should help if you add the track name to the track recorder window with the possibility to edit it. A possibility should be as the picture below.
Attachments
2020-06-10 13.12.46.jpg
(166.94 KiB) Downloaded 570 times
Psyberia-Support
Site Admin
Posts: 6407
Joined: Wed Apr 14, 2010 9:41 pm

Re: Naming recorded track

Post by Psyberia-Support »

Hi and sorry for the delay.

It will change again in the next versions, I'm still reworking the track recorder. I'll try to make this point easier.

But note that to name the track and stop the track recorder, it takes the same number of steps than before, so it's not more difficult, it's just different.
I've updated the online help on this subject: https://www.alpinequest.net/en/help/v2/ ... the_record
Do you like AlpineQuest ? Leave a small comment on Google Play !
ydespond
Posts: 14
Joined: Mon Mar 23, 2015 1:06 pm

Re: Naming recorded track

Post by ydespond »

Hello,

Thank you for the answer.

You are right. My problem is that I frequently miss to name the track before stop it, and after, it is to late.

Best regards
Psyberia-Support
Site Admin
Posts: 6407
Joined: Wed Apr 14, 2010 9:41 pm

Re: Naming recorded track

Post by Psyberia-Support »

It's never too late.
1. You can always edit the name of any track at any time, of course.
2. You can use the "Resume" action, then name the track, then stop.
Do you like AlpineQuest ? Leave a small comment on Google Play !
Post Reply