The support forum is temporarily read-only. For urgent requests, please email contact[at]psyberia.net

Measurement convert to Path (with points intervals of xx meters)

Any question about the app? Ask it here
Post Reply
MapWorm
Posts: 37
Joined: Thu Sep 10, 2020 10:36 am

Measurement convert to Path (with points intervals of xx meters)

Post by MapWorm »

Hi Psyberia team
(Excellent work as always)

Measurement convert to Path (with points intervals of xx meters)

This will be awesome

After you measure between 2 point or several points

Convert to path WITH AUTO POINTS OF XX meters between points automatically

****BUT****

CONVERT TO PATH *** WITH MEASUREMENT BROKEN INTO POINTS OF eg. 20 meters

This way an ABSOLUTELY STRAIGHT PATH **** WITH AUTO POINTS **** WILL THEN PICK UP THE ELEVATION AUTOMATICALLY BETWEEN THE 2 or more POINTS OF A MEASUREMENT PRECISELY AND PERFECTLY

This can also be done by any path or example a measurements between several points which are not in a straight line AND STILL CONVERT TO AUTO POINTS OF eg. 10 m TO BRING OUT THE ELEVATION PERFECTLY EVEN WHEN THE MEASUREMENTS ARE BETWEEN SEVERAL POINTS

Hope you can build this in

Will save endless problems building long paths in straight lines TO BRING OUT THE ELEVATION with the conversion to path BUT *** WITH POINTS WITH eg 20 or 10 meters between each point

Love your work

.....

Try to explain

Measurement taken + exported to track
WITH POINT INTERVALS OF USER DEFINED METERS
-------------------------------
Not a line any more
But
Points along the measurement path

But now lots of points intervals
So this new exported measurement are now A PATH WITH LOTS OF POINTS WHICH PICK UP THE TOTAL MEASUREMENTS ELEVATION THROUGHOUT THE COMPLETE measurement in the new exported path WITH POINT SEGMENTS

Hope you understand

Keep up the good work

Thx in advance

MapWorm
.......
Psyberia-Support
Site Admin
Posts: 6406
Joined: Wed Apr 14, 2010 9:41 pm

Re: Measurement convert to Path (with points intervals of xx meters)

Post by Psyberia-Support »

Hi and thanks for your suggestion,
Yes I understand your request, it makes sense.
Right now you can only get the elevation profile when you manually draw a path on the map.
But I'll try to add this ability also when you convert a route or measure to a path. This is now in the waiting list.
Do you like AlpineQuest ? Leave a small comment on Google Play !
MapWorm
Posts: 37
Joined: Thu Sep 10, 2020 10:36 am

Re: Measurement convert to Path (with points intervals of xx meters)

Post by MapWorm »

Gazillion thx
This will then be helpfull for lots of professionals especially comms towers installers AND THIS WILL BE TOTALLY OFFLINE
Psyberia-Support
Site Admin
Posts: 6406
Joined: Wed Apr 14, 2010 9:41 pm

Re: Measurement convert to Path (with points intervals of xx meters)

Post by Psyberia-Support »

Yes I understand, it's still on the wanted features list.
Note that you can already project points one after one (offline), based on a distance and direction.
Do you like AlpineQuest ? Leave a small comment on Google Play !
MapWorm
Posts: 37
Joined: Thu Sep 10, 2020 10:36 am

Re: Measurement convert to Path (with points intervals of xx meters)

Post by MapWorm »

Any indication when this will be added

Apologies for the q

Thx

MapWorm
Psyberia-Support
Site Admin
Posts: 6406
Joined: Wed Apr 14, 2010 9:41 pm

Re: Measurement convert to Path (with points intervals of xx meters)

Post by Psyberia-Support »

Hi,
Sorry right now I don't know, there are various features that I would like to add first in the next update.
Do you like AlpineQuest ? Leave a small comment on Google Play !
MapWorm
Posts: 37
Joined: Thu Sep 10, 2020 10:36 am

Re: Measurement convert to Path (with points intervals of xx meters)

Post by MapWorm »

Thx
Keep up the good work

Many engineering companies will benefit from this
Post Reply