Measure

You can tell us what you like or don't like in AlpineQuest, and what you would like to see in future releases.
alexlong
Posts: 470
Joined: Fri Jul 31, 2015 8:06 am
Location: Russia

Measure

Post by alexlong » Wed Aug 25, 2021 1:29 pm

Hi, François.
I send a question (suggestion) from a 4pda forum user.
There is a suggestion for improvement. Is it possible to use "Create a placemark → measure" to give a result with tenths (or better hundredths) of a meter? That is, with centimeter-decimeter accuracy. Or at least the ability to change the accuracy at the user's request (probably in user settings).
In some cases I need to make a measurement. For example, a need a measurement from the corner of the house to the road, or to the communication from the scheme that I uploaded to AlpineQuest. Or find out the distance on my own scheme loaded in AlpineQuest from power lines, fences, and other characteristic points, to other objects in the drawing.
This will not be in great demand, mainly for topographers and surveyors it may be useful.
The original message is here → https://4pda.to/forum/index.php?s=&show ... =101527658 (for registered users only)
Thanks.

Psyberia-Support
Site Admin
Posts: 4884
Joined: Wed Apr 14, 2010 9:41 pm

Re: Measure

Post by Psyberia-Support » Thu Aug 26, 2021 1:50 pm

Hi Alex,
Right now decimals are only displayed for distances less than 10 meters.
But I can add an user setting to change this, and also one for the number of decimals.
Do you like AlpineQuest ? Leave a small comment on Google Play !

Post Reply