Measure

Post a reply


This question is a means of preventing automated form submissions by spambots.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review
   

If you wish to attach one or more files enter the details below.

Expand view Topic review: Measure

Re: Measure

by Psyberia-Support » Thu Aug 26, 2021 1:50 pm

Hi Alex,
Right now decimals are only displayed for distances less than 10 meters.
But I can add an user setting to change this, and also one for the number of decimals.

Measure

by alexlong » Wed Aug 25, 2021 1:29 pm

Hi, François.
I send a question (suggestion) from a 4pda forum user.
There is a suggestion for improvement. Is it possible to use "Create a placemark → measure" to give a result with tenths (or better hundredths) of a meter? That is, with centimeter-decimeter accuracy. Or at least the ability to change the accuracy at the user's request (probably in user settings).
In some cases I need to make a measurement. For example, a need a measurement from the corner of the house to the road, or to the communication from the scheme that I uploaded to AlpineQuest. Or find out the distance on my own scheme loaded in AlpineQuest from power lines, fences, and other characteristic points, to other objects in the drawing.
This will not be in great demand, mainly for topographers and surveyors it may be useful.
The original message is here → https://4pda.to/forum/index.php?s=&show ... =101527658 (for registered users only)
Thanks.

Top